Fibre laser cutting machine price is one of the most concerned elements. Production of laser cutting machine business many, the price difference is large, from tens of thousands to millions of all. Purchasers in the choice will often be in a dilemma, so the price of cheap and high prices and equipment differences in the end where it? What factors determine the price of metal laser cutting machine?

1) servo motor: related to the laser cutting machine cutting accuracy and service life, some manufacturers choose to import servo motors, some are joint ventures factory servo motors, some are miscellaneous motors. If every day is non-stop full-power work, in the choice of cutting machine must be equipped with high-quality performance of the servo motor, do not be greedy for cheap.

2) laser lens: the relationship between the laser cutting machine power size, imported lenses, domestic lenses, domestic lenses inside the production of imported materials and the use of domestic materials production of two kinds of price difference is very large, the use of the effect and service life gap is also very large.

3) laser tube: this is the heart of the laser cutting machine. Because of the high price of imported laser tube, generally in the tens of thousands of yuan, so most of the domestic laser cutting machine using domestic laser tube. Domestic laser tube is also a mixture of good and bad, the price gap is huge. Good laser tube service life is generally about 3000 hours.

4) Mechanical assembly quality: good laser cutting machine body, beam, sheet metal shell are concerned, in order to machine cutting accuracy and cutting product quality considerations, this choice should be careful. Some customers do not understand, buy the machine only look at the price, that cheap quality is not necessarily poor, since the dry production is no problem. This varies depending on the type of processing. If you buy a 3000W laser cutting machine, usually cut the steel plate is 10mm or less, do not cut the machine thick plate at all, this is generally fine, if you often cut thick steel plate, time will find that the accuracy of the cut out of the error, if you do not consider the full picture, you may never find out where the problem is. There is also sheet metal shell, some manufacturers in order to follow further cost reduction, the use of very thin iron to make the machine shell, the user generally do not see, but over time, the frame will be deformed, will also affect the cutting accuracy of the laser cutting machine. A good laser cutting machine should be a frame structure, the use of high-quality steel welded and made of high-quality cold-rolled steel to make the shell. Users to buy the machine, see whether the use of frame structure and the thickness and strength of the casing iron can be found on the quality of the good and bad.

5) the function of the machine: some people familiar with the laser cutting machine exclaimed, now the laser cutting machine configuration increased so much, the price and the previous years compared to the decline, how to congratulate ah. But some people say, don't be bluffed by those bright external things, if compared to the reliability and maintenance service is convenient and affordable, a lot of new equipment is not as good as in previous years, "the old three things". This is the real truth. It's always the same phrase "you get what you pay for". As a businessman this is an unchanging experience.

　In the purchase of metal laser cutting machine, do not only focus on everyone's factors, but also should be based on the requirements of the cutting process, the thickness of the level of analysis to choose the type of laser cutting machine, but also does not mean that the better the configuration of the laser cutting machine is the better, the key lies in the processing of their own production needs. In recent years, the laser cutting machine prices down significantly and the increase in functionality, so that many users into a misunderstanding, think they buy the laser cutting machine is "all-powerful", what can be done, which in fact is a big mistake, not only a waste of money, and the equipment operating efficiency can not be good use.