We will inevitably encounter some failures in the process of using the laser tube cutting machine, such as cutting the tube cut constantly, for this problem, I help you to collate some of the main reasons and solutions for the laser tube cutting machine cut constantly, I hope to help you.

　　一、Cutting auxiliary gas pressure is not enough

　　Laser pipe cutting machine in the cutting, auxiliary gas can blow off the cutting residue, keep the cutting section smooth and flat, but when the auxiliary gas pressure is not up to the time, the residue is difficult to remove, which will lead to the emergence of cutting impermeable situation. Generally in the cutting of thicker workpieces when the gas pressure to reduce a little, stick to the workpiece residue will damage the cutting edge.

　 二、 The laser's speed of light quality

　　Laser beam issued by the cone, so cut out the gap is also cone, the shape of the laser beam is a major factor affecting the cutting accuracy of metal laser cutting machine. The beam is too diffuse, so that the spot is too large, will also affect the cutting effect. In this conical laser beam conditions, the greater the thickness of the workpiece, the lower the accuracy will be, so the larger the slit.

　　三、 Exceeding the limit cutting thickness

　　The thickness of the pipe is associated with the laser power, different power laser pipe cutting machine, there is a limit of cutting thickness value, if the thickness of the cutting pipe more than the limit thickness of the equipment can cut, there will be a pipe cutting impermeable situation. Therefore, in the purchase of laser pipe cutting machine must first confirm that we are now as well as later to cut the pipe specifications before deciding to buy which one of the equipment.

　　四、 The laser head optical component pollution

　　Laser pipe cutting machine mainly rely on the laser cutting head to run the cutting process, laser cutting head optical components mainly include focusing components, protective lenses and so on. Laser cutting head for a long time in a poor working environment, it is easy to lead to the surface of the lens residue, these residues may lead to a decline in the laser power of the equipment, resulting in metal workpiece cut through the situation. Therefore, in use, we should often check the protective lenses and other accessories whether there is residue, clean up residue in a timely manner.

　五、Cutting focus offset

　　Laser pipe cutting machine cutting focus setting is also one of the important factors affecting the quality of cutting, when the laser head cutting focus debugging is not up to standard, may lead to plate cutting impervious to the occurrence of the situation. There are in use, should be timely check the position of the cutting focus.

　　The above is about the laser pipe cutting machine cut constantly five main reasons and solutions, in the use of laser pipe cutting machine cut impervious, will not only affect the production efficiency, waste of materials, but also on the laser cutting equipment will also cause some impact. So when the problem is found in a timely manner to solve, adjust the parameters of the laser pipe cutting machine, to ensure that the normal operation of the equipment.